|
|
 |
Home > Retail
Showroom >> SuperMax Tools
|
|
|
 |
| ...it's
worth your while to check out our SuperMax® sanders
— they are the best in their class and are guaranteed
to sand within .010" uniform thickness across the width
of the sanding drum. |
| • |
|
Continuous-duty
1-1/2HP motor, 110 Volt power |
| • |
|
25" width
capacity allows wide sanding in a single pass |
| • |
|
3/32" per
turn height adjustment |
| • |
|
Depth gauge
with locking stop |
| • |
|
Height adjustment
handle makes both radical height changes and minute adjustments
for extremely precise sanding thickness control |
| • |
|
Zinc-plated
steel tension rollers mount next to the drum |
| • |
|
Drum height
and downward pressure are adjustable, eliminating snipe |
| • |
|
Precision-flattened
steel conveyor bed reinforced with four steel cross sections
|
| • |
|
Infinitely variable
feed rate, from 0 to 10 feet per minute |
| • |
|
No give conveyor
offers infinitely variable feed rate, from 0 to 10 feet per
minute |
| • |
|
Cast aluminum
stand zinc-plated steel bed, centerless ground column tubes
|
| • |
|
Minimum of 600
CFM dust collection recommended |
| • |
|
Minimal assembly
required |
| • |
|
Drum ball bearings
are sealed and permanently lubricated |
| • |
|
20 Amp service
required |
 |
 |
| ShopPro
25 Drum Sander |
SuperMax
50x2 Drum Sander |
| • |
|
7-1/2HP, 3Ph
or 1Ph |
| • |
|
SandSmart™
automatic control of the infinitely-variable feed rate of the
conveyor |
| • |
|
50" wide
dual (x2) drum sanding capacity |
| • |
|
Electric height
adjustment |
| • |
|
ProScale™
depth gauge insures proper dimensioning |
| • |
|
SandSmart™
Control standard |
| • |
|
Multiple
grit sanding in single pass |
| • |
|
Abrasive
Take-up Fastener |
| • |
|
No-give,
precision flattened steel conveyor bed reinforced with
four steel cross sections |
| |
|
|
| SuperMax
HD Drum Sander |
|
 |
| • |
|
5 HP, 3-phase
or single-phase industrial-grade |
| |
|
Magnetic starter |
| • |
|
Multiple grit
sanding in single pass |
| • |
|
25" or
37" wide dual (x2) drum sanding capacity |
| • |
|
SandSmart™
automatic control of the infinitely-variable feed rate of the
conveyor |
| • |
|
Height of the
rear drum is independently adjustable with relationship to
the front drum |
| • |
|
12" stock
thickness capacity |
| • |
|
ProScale (DRO)
depth gauge insures proper dimensioning |
| • |
|
Self-cooling
drum |
| • |
|
Abrasive Take-up
Fastener |
| • |
|
Tension Rollers,
zinc-plated steel infeed and outfeed rollers mount next to
the drum. Height and downward pressure are adjustable |
| • |
|
No-give, precision
flattened steel conveyor bed reinforced with four steel cross
sections |
| • |
|
Zinc-plated
steel, cast aluminum stand construction, column tubes are centerless
ground |
| • |
|
Dust collection
- mandatory for all models; CFM 25x2 SE - 600 min., 37x2 SE
- 1200 min. |
| • |
|
Shipped assembled,
some minor final assembly required |
| • |
|
Drum ball bearings
are sealed and permanently lubricated |
 |
 |
| SuperMax
SE Drum Sander |
SuperBrush
Sander |
| • |
|
SuperBrush Applications
include but are not limited to: white wood sanding, de-nibbing,
sealer sanding, primer sanding, UV roughing, metal graining/straight
lining, metal de-burring, sanding/polishing solid surface material,
scuff sanding, shutter sanding, de-glossing and de-stressing |
| • |
|
Tension Rollers,
1-1/2" diameter, rubber covered, infeed and outfeed rollers,
are fully adjustable |
| • |
|
Conveyor Feed-rough-top
belt and a reinforced steel conveyor bed |
| • |
|
Sample testing
available |
|
|
|
|
