 |
As the undisputed leader of state-of-the-art
size reduction and recycling systems operating around the world,
Weima America introduces a complete line of reduction and recycling systems. The slow-turning single-shaft shredders WL(K) 10 - WL(K) 25 are used in the wood, plastic and recycling industries for shredding large volumes of pallets, textiles, paper, rigid plastic film, fiber material and more.
| • |
|
Uniform Chip Size |
| • |
|
Low Horsepower Requirements |
| • |
|
High Output Volume |
| • |
|
4x Indexable Knives |
| • |
|
Lift-Up Screen (Optional) |
| • |
|
Heavy Duty Gearbox |
| • |
|
Integrated Hydraulics |
| • |
|
Heavy Duty Bearing |
| • |
|
Torque Converter (Optional) |
| • |
|
Plug and Play Control Panel |
| • |
|
Sturdy Frame Design |
| • |
|
Super Cut (Most Models) |
| • |
|
Low Speed, High Torque |
| • |
|
Low Horse Power |
| • |
|
Low Noise |
| • |
|
Rotor Cooling System (Optional) |
| • |
|
Hydraulic Oil Cooling (Optional) |
| • |
|
Gearbox Cooling (Optional) |
| • |
|
Hydraulic Drive (Optional) |
|
|
 |
| Standard 10" (252mm) Rotor Diameter Offers High Throughput Capacity |
The 14.5" (368 mm) Rotor Diameter is Designed for Large Pieces and Extra High Output |
 |
| |
WL10 |
WL12 |
WL13 |
WL14 |
| Size A (inch/mm) |
70.9 / 1.800 |
78.7 / 2.000 |
82.7 / 2.100 |
90.6 / 2.300 |
| Size B (inch/mm) |
39.4 / 1.000 |
47.2 / 1.200 |
51.2 / 1.300 |
59.1 / 1.500 |
| Size C (inch/mm) |
47.2 / 1.200 |
47.2 / 1.200 |
47.2 / 1.200 |
47.2 / 1.200 |
| Size D (inch/mm) |
82.7 / 2.100 |
82.7 / 2.100 |
82.7 / 2.100 |
82.7 / 2.100 |
| Size E (inch/mm) |
67.7 / 1.720 |
67.7 / 1.720 |
67.7 / 1.720 |
67.7 / 1.720 |
| Size F (inch/mm) |
40.6 / 1.030 |
40.6 / 1.030 |
40.6 / 1.030 |
40.6 / 1.030 |
| Size G (inch/mm) |
39 / 990 |
39 / 990 |
39 / 990 |
39 / 990 |
| Hopper Opening (inch) |
39.4 x 47.2 |
47.2 x 47.2 |
51.2 x 47.2 |
59.1 x 47.2 |
| Hopper Opening (mm) |
1.000 x 1.200 |
1.200 x 1.200 |
1.300 x 1.200 |
1.500 x 1.200 |
| Hopper Vol. (vd3/m3) |
1.7 / 1,3 |
2.0 / 1,5 |
2.1 / 1,5 |
2.5 / 1,9 |
| Throughput (kg/h) |
The throughput rate depends on material composition and screen size |
| Rotor Diameter (inch/mm) |
14.5 / 368 |
14.5 / 368 |
14.5 / 368 |
14.5 / 368 |
| Rotor Speed (rpm) |
60-120 |
60-120 |
60-120 |
60-120 |
| Power (hp) |
50/60 |
60/75 |
60/75 |
75/100/120 |
| Power (kW) |
37/45 |
45/55 |
45/55 |
55/75/90 |
| Tools (Pieces) |
52 |
64 |
68 |
82 |
| Screen Size (mm) |
3/8 - 4/10 - 100 (for all models) |
| Connection-Ø (mm) |
8/200 |
8/200 |
8/200 |
10/250 |
Weight Approx.
(lbs/kg) |
7,700 / 3.500 |
8,800 / 4.000 |
9,900 / 4.500 |
12,300 / 5.600 |
| |
WL15 |
WL18 |
WL20 |
|
| Size A (inch/mm) |
90.6 / 2.300 |
102.4 / 2.600 |
118.1 / 3.000 |
| Size B (inch/mm) |
59.1 / 1.500 |
70.9 / 1.800 |
78.7 / 2.000 |
| Size C (inch/mm) |
59.1 / 1.500 |
59.1 / 1.500 |
59.1 / 1.500 |
| Size D (inch/mm) |
106.3 / 2.700 |
106.3 / 2.700 |
106.3 / 2.700 |
| Size E (inch/mm) |
67.7 / 1.900 |
74.8 / 1.900 |
74.8 / 1.900 |
| Size F (inch/mm) |
40.6 / 1.030 |
40.6 / 1.030 |
40.6 / 1.030 |
| Size G (inch/mm) |
39 / 990 |
47.2 / 1.200 |
47.2 / 1.200 |
| Hopper Opening (inch) |
59.1 x 59.1 |
70.9 x 59.1 |
78.7 x 59.1 |
| Hopper Opening (mm) |
1.500 x 1.500 |
1.800 x 1.500 |
2.000 x 1.500 |
| Hopper Vol. (vd3/m3) |
3.0 / 2,3 |
3.7 / 2,8 |
3.9 / 3,0 |
| Throughput (kg/h) |
The throughput rate depends on material composition and screen size |
| Rotor Diameter (inch/mm) |
14.5 / 368 |
14.5 / 368 |
14.5 / 368 |
|
| Rotor Speed (rpm) |
60-120 |
60-120 |
60-120 |
| Power (hp) |
75/100/120 |
75/100/120 |
100/120 |
| Power (kW) |
55/75/90 |
55/75/90 |
75/90 |
| Tools (Pieces) |
82 |
100 |
112 |
| Screen Size (mm) |
3/8 - 4/10 - 100 (for all models) |
| Connection- Ø (mm) |
10/250 |
10/250 |
10/250 |
|
Weight Approx.
(lbs/kg) |
12,300 / 5.600 |
16,000 / 7.300 |
17,900 / 8.100 |
|
|
