 |
Today, a variety of demands are made
on a modern sanding center for surface sanding, e.g.:
| • |
|
Veneer, lacquer
and foil sanding |
| • |
|
Calibration
and finish sanding of solid wood |
| • |
|
Processing cross
and longitudinally veneered parts it |
| • |
|
Alternating
small and large series production |
| • |
|
Sanding warped and
differently tolerated parts |
| • |
|
Different workpiece
shapes, e.g. round, oval, rectangular and asymmetric |
| • |
|
Processing different
wood and lacquer types |
| • |
|
High surface quality
by means of an effective sanding procedure |
| • |
|
High degree
of sanding security, no sanding through even with only 1 workpiece |
| • |
|
Shortest set
up times and simple operation |
| • |
|
An almost maintenance
free construction |
| • |
|
Low noise emission
and energy consumption |
| • |
|
The worldwide
unique CSD®-pressure beam system with the steplessly adjustable
pressure regulation of each individual sanding pad, an advantage
for the sensitive edge area |
| • |
|
The 32 mm precision
sensing of the workpiece contours for precise pressure regulation |
| • |
|
The tolerance
compensation of 2 mm and more by the elastic pressure beams |
| • |
|
The cross sanding
method for thorough sanding of the workpiece surfaces |
| • |
|
Sanding belt
drives allowing the belt speeds for lacquer or wood sanding
to be changed in steps or continuously |
| • |
|
A central brush
height adjustment from the belt changing side |
| • |
|
A constant working
height of the transport table |
| • |
|
A conveniently
arranged, graphic operating terminal that assists the user
perfectly: a first-class sanding result at a push of the button |
| • |
|
A perfected,
energy saving sanding and transport belt blasting and cleaning
system |
| • |
|
A solid machine
construction combining precision and longevity |
 |
|
 |
| Calibrating
Sanding Unit |
|
Connectable
Calibration Roller |
| Calibrating
sanding unit followed by a cross sanding unit for high-quality
sanding of solid wood. |
|
A calibration
roller on the longitudinal sanding unit, activated by the operating
terminal, also enables calibration work. |
 |
|
 |
| Additional
Brush |
|
Cleaning
of the Workpieces |
| For intermediate
lacquer sanding, an additional brush (Vlies/Anderlon) may be
attached. |
|
Cleaning of
workpieces by rotating blasting nozzles. An additional ionization
device may also be used to increase the cleaning effect. |
|
|
