The T 20 is quick to operate and absolutely accurate. The shaping height is adjusted by push buttons according to the digital readout. For easy settings, adjustment speed for the tool height can be switched between fast and creep motion.

The depth of cut is quickly and easily adjusted according to the digital counter. A hand wheel sets the position of the whole fence and the infeed jaw can be adjusted by a big star knob. For arch-moulding applications, the fence can be dismantled in an instant and remounted quickly after the job. The DORNFIX system, a quick arbor changing system developed by MARTIN, comes with the basic machine and allows effortless changes of arbors and tools in seconds.

Automatic starter and motor overload protection; Electric brake of cutter spindle; Electrical height adjustment of cutter spindle with fast and slow movement (with LED display); Quick change cutter spindle with torque wrench; Electro pneumatic cutter spindle locking; Centralized lubrication; Switch for clockwise and anti-clockwise rotation of spindle; Hard coated aluminum fence plates with main fence adjustment and fine adjustment of infeed fence with digital counters; Guard FRS95 for bow moulding; Centrex guard in front of spindle (can be lifted up); Five pole socket with plug for power feeder; and Electrical equipment according to UL/CSA. Accessories include 1 cutter arbor 1 1/4" Ø; 1 torque wrench, 1 spindle wrench, and instruction manuals.

The T 26 is a tilting shaper with a large tilting range of 2x 45,50° and effectively indicates adjustment dimensions for the fence through the patented display. Thanks to the large tilting range of 2x 45,50° a new range of working possibilities is opened. Workpieces can always be worked from below with the spindle tilted to the rear. This allows for greater flexibility and safer operation.

Due to the standard display (patent) indicating the fence's adjustment dimension settings with tilted spindle, adjustments can now be done according to your drawing. Set-ups with tilted spindle are not a game of trial and error any more. The DORNFIX system, a quick arbor changing system developed by MARTIN, comes with the basic machine and allows effortless changes of arbors and tools in seconds.

Automatic starter and motor overload protection; Electric brake of cutter spindle; Electrical height and angle adjustment of cutter spindle with fast and slow movement LED display for spindle height (absolute + relative height); LED display for tilting angle and automatic setting value indication for depth of cut in tilted position; Quick change cutter spindle with torque wrench; Electro pneumatic cutter spindle locking; Centralized lubrication system; Switch for clockwise and anti-clockwise rotation of spindle; Hard coated aluminum fence plates with main fence adjustment and fine adjustment of infeed fence with digital counters; Guard FRS95 for bow moulding; Centrex guard in front of spindle (can be lifted up); Five pole socket with plug for power feeder; and Electrical equipment according to UL/CSA. Accessories include 1 cutter arbor 1 1/4" Ø, 1 torque wrench, 1 spindle wrench and instruction manual.