The MOA (single sided) and MOD (double sided) mortising machines can make holes and slots with automatic working cycle. The slot mortiser Model MOA makes slots and holes for tenons, it is particularly suitable for the manufacturing of chairs, tables, and solid wood components. The sturdy construction and the use of high quality raw-materials and components make the Model MOA a very reliable machine.

The oscillation movement and revolution of the bit is controlled by motor. The speed of the oscillation movement is adjustable by the operator thus allowing the best possible cut at all times, according to the quality of the wood and dimensions of the slots. A simple pushbutton stops the oscillation movement: the machine will be then able to perform as a boring machine.

The worktable is adjustable in height and depth independently one to the other. Further, they are tiltable up to 25°. The forward speed of the table is hydraulically controlled and adjustable in order to have a constant and smooth movement. The return speed is automatically made at high speed.

The simplicity of all adjustments and their easily accessible position makes both the Model MDO and MOA machine adjustment times reduced to a minimum.

The Model TSG2T Tenoning Machine is an automatic rounding off tenoning machine can produce any type of rounded tenons with any inclination and even vertical tenon as to the table surface.

The Model TSG2T is able to execute compound angle tenons. Performs continuous revolution movement of cutter around the piece. Standard and anti-splintering cycle. Adjustments of thickness, length and inclination of tenon can be done with the machine in movement through external wheels. Table feed with hydraulic adjustment to avoid "stick-slip." Support square for piece rotating around a fixed point. Possibility to cut off, adjusting thickness to "0". The Model TSG2T has a cast iron frame to eliminate vibrations.

The Model TSD is a double end rounding off tenoning machine that makes tenons on both ends of the piece at the same time with all the three possible angles.

It features a continuous revolution of cutter around the piece. Possibility of horizontal and vertical inclination of very short pieces. Features bronze grinded dovetail guides. Thickness, inclination and width of tenons is adjusted by external handles, even when the machine is working. Possibility to cut off, adjusting the thickness to "0". Working heads mounted on angular contact high precision bearing to eliminate clearances. Motorized approaching of the R.H. heads. The Model TSD features cast iron frame to eliminate vibrations.