Mueller Header Mueller Header
Home Industrial Equipment Used Equipment Retail Showroom Service & Repair
What's New How to Find Us FAQ's About Us Contact Us Site Map
Industrial Equipment
Panel Processing
Solid Wood
Industrial Equipment
Assembly Clamps
Clamp Carriers
CNC Routers
Cut-Off Saws
Dovetail Machines
Dust Collection
Edge Belt Sanding
Face Frame Systems
Horizontal Panel Saws
Mortise & Tenon Equipment
Optimizing Cross-Cut Saws
Panel Stacker/Destacker
Pocket Systems
Point to Point Machines
Production Planers
Profile Grinders
Return Conveyors
Shape & Sanding Machines
Sliding Table Saws
Stop/Gauge-Pusher Systems
Table Saws
Vertical Panel Saws
Widebelt Sanders
Wood and Plastic Waste Grinders
32 MM Boring Machines
Retail Menu Top
Accurate Technology, Inc.
Powermatic Industrial
Safety Speed Cut
Shop Fox
Stiles Shop Solutions
Whiteside Machine
Retail Menu Bottom
OMEC F8 Multiple Milling Machine for Dovetail Joints
OMEC F8 Multiple Milling Machine for Dovetail Joints
The multiple milling machine OMEC F8 is utilized to indent dovetails for drawers and various furniture elements. The machine is equipped with a unit of eight spindles with equal mill cutters that allow the production of indents of different heights. The F8 model can machine single male or female workpieces, or both simultaneously in manual mode and male-female pieces automatically The locking of the pieces takes place automatically at the beginning of each cycle. The same takes place for the release of the pieces at the end of each cycle.

Controls are located on a built-in control panel. The F8 model is controlled by a programmable controller (PLC) that is entrusted with the working cycle control.

F8 Technical Specifications
On Board Machine Installed Power 7,5 kw
Working Pressure 0,7 Mpascal
Number of Spindles 8
Spindle Revolutions 17000 rpm
Center to Center of Indents 25 mm
Drawers Production 120 n/h
Machine Weight 1100 kg
Packing Dimensions 165 x 110 x 140 cm

For More Information on Our Industrial Products, Contact Us at 800.642.5656!

Dimensional Limits of Workpieces
Dimensions Length Width Height of Indent
Minimum 200 mm 80 mm 7 mm
Maximum 1500 mm 400 mm 16 mm

Dimensions Front Thickness Side Thickness
Minimum 7mm 8 mm
Maximum 50 mm 25 mm

Standard Configuration
  Series of 8 Integral Widia Cutters Installed on the Machine
  Cams Plate for Working Sides s=14-20 mm
  Tool Kit for Adjustments and Maintenance
  Users and Instruction Manual

Optional Features
  Equipment for the Machining of Curved Front Pieces
  Cams Plate for Working Sides s=10-12 mm
  Cams Plate for Working Sides s=12-14 mm
  Cams Plate for Working Sides s=20-25 mm
  Cams Plate for Working Sides s=8-10 mm
  Machining Equipment for Tall Sides
  Deburring Tool
  Vacuum Equipment to Machine Short Pieces
  Integral Widia Spare Cutters
  Integral Widia Cutters Kit with Deburring Tool for Working Soft Wood