Edward B. Mueller Company, Inc.

Home > Industrial Equipment > Solid Wood > Dovetail Machines >> OMEC F11CN

OMEC F11CN Semi-Automatic Numerical Control Milling Machine for Dovetail Joints

The two-axis automatic mill cutter with numerical control, OMEC F11CN, is designed to indent dovetails, French and parallel indents for drawers and several furniture elements. The machine is extremely flexible and enables you to perform ten different types of indents. Model F11 CN is equipped with a spindle and a mill cutter that allow the production of indents of different heights. The machine is designed to cut single male or female workpieces, or both simultaneously. Pieces can be clamped and released in manual mode by means of pneumatic valves.

Controls are issued from a numerically controlled push button panel. Model F11 is controlled by a numerical control system that is programmed to guarantee the utmost machining flexibility and to change the machining limits within the following variables:

•		type of indents
•		the pitch of the indents
•		the number of indents
•		the depth of the indents
•		the dimensions of the indents
•		the cutting speed and the tool feeding
•		the compensation of the tool radius variation
•		the variation

F11CN Technical Specifications

On Board Machine Installed Power	4,2 kw
Working Pressure	0,7 Mpascal
Spindles	n° 1
Spindle Revolutions	18000 rpm
Center to Center of Indents	mm Variable
Drawers Production	60 n/h
Machine Weight	400 kg
Packing Dimensions	100 x 185 x 145 cm

For More Information on Our Industrial Products, Contact Us at 800.642.5656!

Dimensional Limits of Workpieces

Dimensions	Length	Width	Height of Indent
Minimum	170 mm	60 mm	6 mm
Maximum	1500 mm	770 mm	18 mm

Dimensions	Thickness of Front	Thickness of Sides
Minimum	8 mm	8 mm
Maximum	55 mm	30 mm

Standard Configuration

•		Standard Ø 14 Mill Cutters in Integral HM Assembled on the Machine
•		Tool Kit for Adjustment and Maintenance Operations
•		Operation and Instruction Manual

Optional Features

•		Equipment for the Machining of Small Pieces
•		Chip Suction Unit
•		Ø 14 Standard Spare Mill Cutters in Integral HM
•		Ø 14 Mill Cutters with Deburring Tool in Integral HM to Machine Soft Woods
•		Ø 6÷13 Dovetail Mill Cutters for the Production of Indents with Small Pitches
•		Ø 6÷14 Cylindrical Mill Cutters for the Production of Parallel Indents
•		Spindle Clamp for Ø 6÷13 Mill Cutters