 |
Fully automatic drilling and dowel inserting
machine for simultaneous drilling, gluing, and dowel inserting.
Fully automatic drilling and dowel inserting
machine for simultaneous drilling, gluing and dowel inserting.
Same as ELITE 25, but additionally equipped with vertical-boring
unit, 25 spindles, pitch 32mm, drilling from below, adjustable
5-40 mm by digital counter.
Fully automatic dowel inserting machine
for simultaneous gluing and dowel inserting. Same as ELITE 25,
but without horizontal-boring unit, 25 spindles, pitch 32 mm.
Machines are specially designed to save
time and labor in medium and large production plants utilizing
dowel construction. Most profitable for single pieces as well as
for small and high series production. Single handling of workpiece
for drilling, gluing and inserting, with a complete cycle time
of approximately 4 seconds (e.g. on Elite 25).
| • |
|
Robust steel base
construction |
| • |
|
Pneumatic up
and down movement of the drilling /inserting unit on double
end guides by profile linear bearings and torsion bar stabilizer.
Centerized lifting cylinder optimally positioned near the supporting
table |
| • |
|
Precision boring
unit with drill head 25 spindles pitch 32 mm with double end
guides and linear bearings for best stability throughout the
entire length of the boring unit |
| • |
|
Inserting unit
with 2 powerful cylinders with end-to-end stabilizer assuring
best stability throughout the entire length of the inserting
unit |
| • |
|
With modification
kits different dowel diameters can be used.
6 / 8 /10 /12mm, 25-50 mm length |
| • |
|
Dowel diameter-
and length control prevents insertion of any oversize (+2 mm)
dowels |
| • |
|
Pivoting mechanism
for clamping cylinders for easy tool change. High-speed chucks
are standard. Easy moving of dowel inserting units, 32 mm indexing
with spring-loaded pins |
| • |
|
Side fences, boring
and inserting depth and position-adjustment for drilling height
settings by digital counters |
| • |
|
Three program position
settings for side fence for frequently used boring patterns |
| • |
|
Completely closed
6 bar glue system eliminates the hardening of the glue in the
nozzle and the need for routine cleaning of the glue system |
| • |
|
Electronically controlled
glue amount selector switch |
| • |
|
Minimal distance
between glue nozzle and dowel hole, together with the 6 bar
glue pressure system (or optional 24 bar glue pressure system),
assures a precise glue shot and clean dowel inserting |
| • |
|
Glue/Water selector
switch for recommended occasional rinsing of the entire glue
system |
| • |
|
Control light indicating
low volume of glue in the glue container |
| • |
|
Two separate
5-liter (1.5 gallon) stainless steel containers for glue and
water |
| • |
|
Fully automatic
maintenance-free electronic control with self-diagnostic program |
| • |
|
Electronically controlled
mirror image program with control lights for indicating right
or left sided side stop (optional) |
| • |
|
Five stage selector
switch for different applications |
 |
|
 |
| Singulating
Vibratory Hopper |
|
Adjustment
of Side Fences by Digital Counters |
| Units contain
a Singulating Vibratory Hopper. |
|
Adjustment of
side fences by digital counters from 5-40 mm. |
 |
|
 |
| Fixture
for the Face Drilling of Small Workpieces |
|
Processing
of Miter Frames with 1 Pair of Miter Stops |
| Fixture for
the face drilling of small workpieces, vertically clamped (optional). |
|
Processing of
miter frames with 1 pair of miter stops 45° (optional). |
 |
|
 |
| Processing
of 90° Frames with Standard Side Fences |
|
Adjustment
of Boring Depth and Outstanding Dowel Length |
| Processing of
90° frames with standard side fences. Side fences set to
middle position. |
|
Adjustment of
boring depth and outstanding dowel length by digital counter. |
|
|
